JTEKT CORPORATION

TOYOPUC

TOYOPUC DRMT series

The DRMT series is DeviceNet compatible Remote I/O terminal with input /output wiring short circuit or wire-cutting detection

1.function.

	1．In/Out short circuit detection I/O power current is monitored. A short circuit is detected when detects more than 50mA per 1 point.

	2．Wire cutting detection I/O power current is monitored. A wire-cutting is detected when less than 0.3mA per 1 input point.

	3．I/O power voltage monitoring Whether I/O power is supplied to units or not is reported to a Master.

4．Diagnostic information collection Diagnostic information of short circuit, wire-cutting and I/O power down can be read via message communication. Trouble shooting time is much reduced using these information for facility information display. J-DLINK-M2,PC3JG and PC3JG-P have Message communication available masters.

2. General specifications

Item

Specifications

Communication power

DC11-25V (supplied through a communication connector)

Ambient temperature (usage)

-10-55 degrees centigrade

Ambient temperature (preservation)

-25-65 degrees centigrade

Relative humidity

25-85%RH (No condensation allowed)

Atomosphere

No corrosive gas allowed

Vibration resistance

JIS C0911 conformity
(150m/s² 3 directions 3 times each)

Freq.

Acce.

Ampl.

Scan

10～60Hz

0.35mm

10 times (1 octave/1 min.)

60～150Hz

50m/s²

Shock resistance

JIS C0912 conformity (150m/s²3 directions 3 times each)

Noise resistance

IEC 61000-4-4 conformity 2kV (Power line)

Insulation resistance

20Mohm (by DC250V meggar) Charge circuit, non-charge circuit.

Insulation resistance

Comunication power (includeing internal power supplies)

I/O type

Current consumption

DRMT-32/00

Less than 65mA

DRMT-00/32

Less than 55mA

DRMT-16/16

Less than 60mA

DRMT-32/00P

Less than 65mA

DRMT-00/32P

Less than 55mA

DRMT-16/16P

Less than 60mA

Installation

DIN35mm rail installation

Installation strength

50N (except for rail directions), 10N (rail direction)

External dimentions

245（W）×50（H）×56.4（D）mm

Weight

Less than 0.48kg

保護装置

IP20

3.Series

Item	Code	Input	Output	Polarity
DRMT-32/00P	TFU-6110	32 point	0 point	PNP
DRMT-00/32P	TFU-6111	0 point	32 point
DRMT-16/16P	TFU-6112	16 point	16 point
DRMT-32/00	TFU-6120	32 point	0 point	NPN
DRMT-00/32	TFU-6121	0 point	32 point
DRMT-16/16	TFU-6122	16 point	16 point

4.Input specifications

Item		Specifications
Insulation method		Photo coupler insulation
Rated input voltage		DC24V
Rated input current		Less than 6.0mA/point
Usable voltage range		DC20.4~26.4V（DC24V -15~+10%）
ON voltage/current		More than DC15V/3mA	NPN:between each input terminal and +V
			PPNP:between each input terminal and 0V
OFF voltage/current		Less than DC5V/1mA	NPN:between each input terminal and +V
			PNP:between each input terminal and 0V
Input resistance		About 4k ohm
Time	OFF → ON	Less than 1.5ms
	ON → OFF	Less than 1.5ms
Input points per a common		16 points/common
Operation display		I/O lamp display (yellow)
I/O power short circuit detection		Detection at more than 50mA/point
No connenction detection		Detection at more than 0.3mA/point
Connection status		Screw-less terminal block (green)

5.Output specifications

Item		Specifications
Insulation method		Photo coupler insulation
Rated load voltage		DC24V
Max. load current		0.5A/point、4.0A/common
Usable voltage range		DC20.4～26.4V（DC24V－15～+10%）
Max. voltage descend at ON		Less than 1.2V	NPN:between each output terminal and 0V
			NPN:between each output terminal and V
Leak current at OFF		Less than 0.3mA ^*1	NPN:between each output terminal and 0V
			NPN:between each output terminal and V
Time	OFF → ON	Less than 0.5ms
	ON → OFF	Less than 1.5ms
Output points per a common		16 points/common
Operation display		I/O lamp display (yellow)
No connection detection		Detection at less than 3mA/point
Connection status		Screw-less terminal block (red)
Output at communication error		All points OFF

*1 : If a connected load works under 0.3mA, please add bleeder resister.