JTEKT CORPORATION

TOYOPUC

Hellowin

Hellowin is a Windows(R) 95/98 based program used to interface with TOYOPUC [PC3J] and [PC2/PC2J] units.
Upgrade History

2. Features

1.Hardware Interdependent.
Runs on any Windows(R) based system with one available communications port.
Prints to any brand of Windows(R) compatible printer.

2.Ease of Installation.
QuickStart provides easy installation for all users.
QuickStart also provides for easier uninstallation as compared with the [Add/Remove Programs applet].

3.Ease of Operation.
Software operations conform to Windows(R) 95/98 standards for ease of use.
The menu system is adopted from Mowin for familiarity.
Extensive help menus provide immediate information so that searching through thick manuals is now unnecessary.

4.Extensive Functionality.
The following functions have been updated for easier operation and increased capacity - as compared to our past programming tool [GL1].

Circuit edit
Monitor
Retrieval function
Print function. It is now possible to print on a near form of the drawing.
Integrates with Electricity CAD(UniDraf)

3.Outline specifications

Operating Environment	System: Any Personal Computer of Pentium(R) grade or better running Windows 95/98/NT(R) (Recommended: 100Mhz Pentium(R) or greater)
	Memory: 32MB or greater
Accessory Equipment	・2HDfloppy disk drive ・100 MB or greater Hard Drive required
OS	Windows 95/98/NT(R)
Display Resolution	Color display with a dot pitch of 800X600 or greater
Printer	Windows(R) compatible

4.Function explanation

Circuit edit(edit)
	It is now possible to edit circuits while online without stopping the PC and entering edit mode. Also, one can selectively change either the address or the symbol without changing the entire operand. Commenting is now enabled while editing a circuit, insuring that comments are made at the same time program changes are - instead of possibly being forgotten latter.

Circuit edit (block editing)
	Block editing is now possible using the Edit screen. Use the mouse to specify the range and then perform one of the following operations: Delete: DELETE Key Copy: CTRL+C Key Paste: CTRL+V Key Cut: CTRL+X Key Multiwindow enables [Movement] and [Copy] operations between windows, resulting in operational efficiencies and ease of use.

Monitor
	The operand of the application instruction in addition to I/O can be monitored by the circuit monitor.

Retrieval function
	The Bookmark function enables quick retrieval of circuits. This allows for quick recall and correction of logic, resulting in increased speed of use. Logic can be recalled by specifying the comment, resulting in the display of the associated operand.

Electric CAD(UniDraf)cooperation
	From UniDraf to Hellowin	Data conversion with UniDraf is possible without CAD I/F by installing the I/F function with electricity CAD(UniDraf).
	From Hellowin to UniDraf

Relation between Hellowin and electricity CAD(UniDraf)

If Hellwin and UniDraf are installed on the same personal computer, CAD data and the PC data can be converted without CAD I/F.