JTEKT | JTEKT CORPORATION
Search the Web
Search jtekt.co.jp
Mechatronics

TOYOPUC

TOYOPUC PC3JM

It is the programmable controller which bears sequence control of an integrated control system.  
1.The feature
1.Space-saving
PC3JM is one board PC inserted in the extended slot of NC unit (C64T) made by Mitsubishi Electric Corporation. Necessary space in past PC3JNM becomes unnecessary, and is a space-saving.
 
2.Communication port
The HPC link has been equipped normally by one port in PC3JM instead of 2 port M-NET / computer link of past PC3JNM.
 
3.Library function
The load reduction of the sequence design and the number of sheets of the circuit drawing can be reduced by the library function. (Applicable only the PC3J mode.)
 
4.Window function
To treat the data of NC by the sequence,PC3jm has the Window function
(Applicable only the PC3J mode.)
 
5.Sampling function
ON/OFF of an alarm coil is detected by the sampling function,and an alarm code is extracted corresponding to it.

A detailed,alarm display is supported by combining this function with the operation board. (Applicable only the PC3J mode.)
 
2. General specification
Items Specification
Ambient temperature 0-55℃
Relative humidity 30 - 85%RH (But no condensation allowed.)
Atmosphere No corrosive gas allowed.
Vibration resistance Conforming to JIS C0911. Frequency Acceleration Amplitude Sweep cycles
10~57Hz - 0.15mm 10 cycles (1 octave /minute)
57~150Hz 9.8m/s2 -
Shock resistance Conforming to JIS C0912. (147m/s2 3 directions, 3 shocks in each direction)

3.Performance specification
Items Specification
PC2 compatible mode PC3J mode
Program control method Cyclic operation method (subroutine function) Cyclic operation method (subroutine function) Max. 3 programs
Programming method Stored program method
Basic commands 19
Timer and counter commands 14 21
Basic command processing speed 0.08 to 0.28 us/command (Contact), 0.12 to 0.48 us/command (Output)
Application commands 390 or more 450 or more
Program capacity 32K words (127 programs) 48K words (Standard) *1
32K words (User library) *2
External input/output points Max. 1024 points
Internal output points 2048 points 14,336 points (2048 points x 3 + 8192 points) *1
Keep relays 768 points 6400 points (768 points x 3 + 4096 points)  *1
Timer/ Counter 512 points 3584 points  *1
Link relays 2048 points 14336 points (2048 points x 3 + 8192 points)  *1
Data register 12 kW / 16 bits
Link register 2 kW / 16 bits 6 kW / 16 bits (2 kW x 3) *1
Built-in link function HPC link
Link parameter HPC Link
NC I/F (PC-LINK or PC with built-in NC)
NC I/F points Max. 512 points (PC-LINK) Max. 512 points (PC-LINK)
Max. 1024 points (PC-LINK) Max. 4080 points (PC-LINK)
Sampling function None Alarm coil on/off detection, alarm code extraction, I/O trace
Number of special modules that can be installed Max. 7 communication (link) modules Max. 14 communication (link) modules

*1:For a program capacity of 16K words x 3 programs (data partition 1)
*2:Applicable only in PC3J mode.
Page TOP
 
  Customer Center and Machine Tools Exhibit Catalogs JTEKT ENGINEERING JOURNAL
Personal Information Protection Policy Terms of Use for this Site Inquiries COPYRIGHT 2006-2012 JTEKT CORPORATION. All Rights Reserved.