加工中心

5轴卧式主轴加工中心

Outline

  • Large range of workpieces and strokes in the class
  • Stabilization of machining accuracy through the adoption of a tilt spindle
  • Low-heat-generating spindle making the machining of hard material such as aluminum and titanium possible
specification
Item Unit Standard specifications Special specifications
Table & Pallet Table dimensions
(pallet dimensions)
mm □1,250(Pallet) 1,250×1,600
Rotary table indexing angle ° 0.001°(NC)  
Pallet height
(from floor)
mm 1,500  
Max load on pallet kg 5,000  
Table indexing time
(90°indexing)
sec 5.6  
Pallet change time sec 85  
Stroke X×Y×Z-axis mm 2,200×1,600×1,850  
A-axis ° -100~+45  
B-axis ° 360  
Distance from spindle endface to table center
( with spindle at 0°)
mm -150~1,700  
Distance from spindle center to pallet upper face
( with spindle at 0°)
mm 100~1,700  
Distance from spindle endface to pallet upper face
( with spindle at -90°)
mm -250~1,350  
Distance from spindle center to table center
( with spindle at -90°)
mm 200~2,050  
Max. workpiece swing ×
(Max. workpiece height
mm φ2,400×1,800  
Feeds Rapid feed rate
(X,Y,Z)
m/min 32,32,42  
Rapid feed rate
(A)
min-1 30  
Cutting feed rate
(X, Y and Z)
m/min 0.001~30  
Ball screw diameter
(X,Y,Z)
mm φ63(X),φ50(Y,Z)  
Spindle Spindle speed min-1 50~10,000  
Spindle diameter
(front side bearing inner diameter)
mm φ110  
Spindle nose shape   BT No.50  
Spindle motor
(short time/continuous
kW 30/25  
[ ]Shows optional specifications.