产品信息

TOYOPUC 系列

TOYOPUC-PCS

1.Features of TOYOPUC-PCS

This TOYOPUC-PCS was developed based on our many years of experience in PLC development and proven achievements in machine-tool control to meet demand for equipment control to protect human safety as well customer needs (shorter delivery times and cost reductions).

Main features
   ・The safety software circuits has been realized by the redundancy logic circuits.
   ・Short E-Stop reaction time by hi-speed processing time and space saving has been realized
   ・More reliable safety circuit program is available by fault detection function and shorten design lead time.
   ・Down-sizing of safety control circuit is realized by FB function(Function Block)
   ・Field wiring reduction by Safety-networking and safety signal communication
   ・MTTR improvement by employment of control visualization technology
  TOYOPUC-PCS has EN954-1 category 4 ,IEC61508 SIL3 and ISO13849-1 performance level e certification approvals.

2. Safety-relative approved standards

No. Standards Descriptions
1 IEC 61508-1-7:2000 Functional safety of electrical/electronic/programmable electronic safety related system(SIL3)
2 EN 954-1:1996
ISO 13849-1:2004
Safety-relevant parts of control systems
3 EN 61131-2 :2000 Programmable controllers, equipment requirements and tests.
4 EN 50178:1998 Electrical equipment for use in power installation.
5 EN 61000-2-5/IEC 61000-2-5 EMC compliance(EMC)
6 NFPA79:2002 Electrical Standard for Industrial Machine Standard 2002

3. General specifications

No. Item Standards Specifications
1 Power supply Rated: 24VDC 2.5A (Rated: 24VDC 2.5A: DC 21.6-26.4V)
2 Power consumption 60W
3 Ambient temperature 0 to 50 degree C
4 Relative humidity 30-85%RH (No condensation allowed)
5 Atmosphere No corrosive gas allowed
6 Vibration resistance IEC 60069-2-6 conformity Frequency Acce. Ampl. Scans
10~57Hz - 0.35mm 20 times
57~150Hz 49m/s2 -
7 Shock resistance 9EN 60068-2-29 conformity (98m/s2 1000+/-10 times/axis X,Y,Z, axes)
8 Electric discharge immunity IEC61000-4-2 EN 60068-2-29 conformity (98m/s2 1000+/-10 times/axis X,Y,Z, axes)
9 Electrical fast transient/burst immunity IEC-61000-4-4 Signal ports +/- 1kv DC power ports, functional grounding ports.
10 Surge immunity test゙ IEC-61000-4-5 Between the earth +/-1kv
11 Immunity to conducted disturbances, induced by radio-frequency fields IEC-61000-4-6 0.15~80MHz、10V、80%
12 Radiated, radio-frequency electromagnetic field immunity IEC-61000-4-3
0~2000MHz、10V/m、80%

4. TOYOPUC-PCS component modules list

4-1 CPU, Remote I/O module
Name Type Item Specifications
1.CPU TAC-6089 1.Program method Stored program method



2.Program control method Cyclic operation method.
3.Input/Output control method Image resister method
4.Scanning speed At the standalone At the networking
9.5 ms/scan 18ms/scan
5.Program capacity 12K words(Internal memory:64KB)
6.Memory device CMOS-RAM / Flash ROM
7.Battery Rechargeable (Lithium 2nd battery:5 years life)
8.External Input/Output 128 points
9.Internal Input/Output 2048 points
10.Display unit Dot-matrix LED display unit Displays are changed by MOD and INC switches
11.current 180mA
12.weight/mass 0.4Kg
2.S-BUS TAU-6098 1.Physical layer Optical fiber cable method
Master Commun. speed 6Mbps


3.Max. commun. length 100m (inter-station) 1km (Total commun. length of between stations)
4.Max. stations 24 st.(Master Slave) 16 st.(Master Slave)
5. Max. communication All station total 1472 points (184 byte) =(32 Input+32 Output)×23 stations 1920 points (240 byte) =(64 Input+64 Output)x15 stations
3.RMT-S TAU-6102 I/O points/slave 32 points(4 byte)/32 points(4 byte) 64 points(8 byte)/64 points(8 byte)
Remote Slave 6.Network topology Ring


7.Network layer
8.Commun. format HDLC flame conformity
9.Check manner CRC-CCITT
10.Current S-BUS:155mA
RMT-S: 220mA
11.Weight/mass S-BUS:0.15kg
RMT-S:0.36kg


4-2. I/O Module
Name Type Isolation I/O points Voltage/
Current
Remarks Current Weight
/ mass
Quantity offerrite core
Input module DI001

TAK-
6090
Photo couplerr 4
(+
common)

4
(+
common)
24VDC
5mA /
point
Dry
contact
point
Input
65mA 0.16
kg
1
DI003

TAK-
6104
Photo coupler 12
(+
common)
12
(-
common)
100mA 0.32
kg
3
SPM002

TAK-
6177
Photo coupler 8
(-
common)
For
Light
curtain
Inputs
(-)
common
Input
65mA 0.15
kg
1
Output module DO002

TAK-
6093
FET,relay 2
(+
common)
2
(-
common)
24VDC
0.5A/
point
Relay
and
FET mix
Output
55mA 0.32
kg
2
2 3A/
point
DO003

TAK-
6108
FET 12
(+
common)
12
(-
common)
24VDC
0.25A/
point
Semicon-
ductor
Output
70mA 0.34
kg
2


4-3.Components
Name Type Specifications Attached
Lithium battery TIP-5426 CPU module rechargeable battery (spare part)
BASE5 TAR-6148 5 slots base a bracket
BASE8 TAR-6149 8 slots base a bracket
BASE12 TAR-6094 12 slots base a bracket
P-FLT (Power filter) TAU-6207 CPU, RMT-S power filter (Note) P-FLT is necessary for each CPU and RMT-S module. a bracket, a ferrite core
FAN2 (Fan unit 2) TAU-6208 Cooling unit for CPU and RMT-S module (Note) The FAN2 is necessary for each CPU and RMT-S module -
BLANK(Cover) TAU-6211 Protection cover for an empty slot (Note) BLANK is necessary for each empty slot of CPU and RMT-S module -
4-4 Peripheral programmer PCwin-Safe(Windows95/98 and NT 4.0/2000/XP)
Name Type Specifications
1.PCwin-Safe(Japanese)FD TJA-2070 TOYOPUC-PCS software(Floppy disk Japanese)
2.PCwin-Safe(Japanese)CD-ROM TJA-2071 TOYOPUC-PCS software (CD-ROM Japanese)
3.PCwin-Safe(English)FD FD TJA-2072 TOYOPUC-PCS software(Floppy disk English)
4.PCwin-Safe(English)CD-ROM TJA-2073 TOYOPUC-PCS software (CD-ROM English)
5.Option 1"Symbolic FBD"(Japanese) TJA-6048 Option 1 software (Floppy disk Japanese)
6.Option 1"Symbolic FBD"(English) TJA-6049 Option 1 software (Floppy disk English)
7.PCwin-Safe + Option 1 software (Japanese) TJA-2086 TOYOPUC-PC Software (CD-ROM Japanese)+Option 1 software (Floppy disk Japanese)
8.PCwin-Safe + Option 1 software (English) TJA-2087 TOYOPUC-PCS software (CD-ROM English)+Option 1 software (Floppy disk English)
9.Centinel 25P TXY-6066
10.Centinel USB TXY-6067  
11.Communication cable TXY-6071 TOYOPUC-PC connection cable: 3m(15P male-9P female)

5.External dimensions

6.Certificatation

Standards Certification organizations registered No. Certification
ISO 13849-1:2006

Safety of machinery - Safety-related parts of control systems(PLe)

IFA(Germany)

TUV Rheinland(Germany)

Register No.:IFA0901122 Permission No.:0403002

Register No.: Nr./No.968/EZ 173.07.13
English
Germany

Germany
IEC 61508-1-7:2000

Functional safety of electrical/electronic/
programmable electronic safety related system(SIL3)

NFPA79:2002

Electrical Standard for Industrial Machine Standard 2002

TUV Rheinland of North America, inc.(USA)

CU7209245101